Not in stock? Search anyway and add it to your request. We source worldwide.
A leading London company for aircraft sales, support and general aviation parts. For 17 years we have supplied airlines, maintenance facilities and OEMs, at home and overseas.
From routine requirements to urgent AOG situations, broad capability meets responsive customer support.
“Aviator Solutions was built on one founding principle: efficient and trusting relationships, working closely with our customers to deliver reliable service with unsurpassed integrity.”
Awsam FarjoFounder and Chief Executive
Complete coverage, when time matters
Aviator Solutions Limited is an approved, registered company in London, specialising in every type of aircraft spare. Together with our alliances, we cover repairs, overhauls and spares, rotables and expendables, on an outright or exchange basis when time is truly of the essence.
We buy and sell parts for fixed-wing and rotary aircraft, arrange full ACMI leasing contracts and handle aircraft sales. Every request gets our best effort to find you the best quotation, because your integrity is our satisfaction.
Built on trust
The company was founded on one principle: efficient, trusting relationships, working closely with our customers to deliver reliable service with unsurpassed integrity.
We keep investing in our capabilities, our services and our people, so our customers receive the best support available in today’s competitive MRO environment, with less cost on every repair and part requirement.
Manufacturers and platforms we support
Boeing
Airbus
Embraer
Bombardier
Cessna
Piper
Sikorsky
Bell
GE
Rolls-Royce
Pratt & Whitney
Continental
Allison
Goodrich
Honeywell
Rockwell
Aircraft parts
Rotables and expendables for commercial, regional, business and rotary aircraft.
A320/A321
A330
A340
A350
A380
747
757
767
777
787
Embraer
Bombardier
ATR
Rotorcraft
General aviation
Engines & APUs
Engines, modules and auxiliary power units, with the parts and equipment that keep them flying.
Engines
Engine components
APUs
CFM56 series
Engine stands
Teardown
Exhausts
Blades & vanes
OEM parts
Avionics & electrical
Flight deck, power and wiring components, tested and traceable.
Displays
TCAS
Relays
Switches
Circuit breakers
Generators
Gyros
Harnesses
Wires & cables
Batteries
Hydraulics & electro-mechanical
Systems and structures from the wing to the wheels.
Hydraulics & pumps
Actuators
Starters
IDGs & shafts
Valves
Bearings
Landing gear
Wheels & brakes
Ducts
Cowlings
Windshields
Ground support equipment
Equipment, tools and the safety and cabin items every operator needs.
Ground support equipment
Tools
Oxygen
Fire safety
Rafts & slides
Lavatories
Interiors
Catering equipment
Every part category we stock and source
Three ways to supply
Outright sales
Conventional purchase of aircraft parts, rotables and expendables.
Exchange
Time-sensitive requirements supported with exchange parts.
Repair & overhaul
Alliances for repair, overhaul and MRO-related support.
Engine shopMaintenanceInspectionAOG dispatch
Engines
Engines, modules and APUs for sale, lease and exchange.
Landing gear
Main and nose gear, actuators, wheels and brakes.
Aircraft
Sales, brokerage and leasing across commercial and business types.
Every request asks one question first: do you want to buy the part (outright) or repair your own unit? Repair requests go to the shops that specialise in that category, so you receive competitive repair quotes, turnaround times and certification in one reply from Aviator.
Products (hereinafter referred to as "Parts", provided that such
definition of Parts shall include the relevant Trace (as defined below)
are those products specified on the website www.aviatorsolutions.com
"Website", or where such Parts are not specified on the Website as
specified in other written communications of the Company (as defined
below).
Parts are sold and supplied by Aviator Solutions Limited
as "Aviatorsolutions.com" (the "Company") to the person, being a
business, (the "Customer") who submits to the Company a purchase order
for the Parts (via the Website if appropriate, or otherwise by email,
fax or post) (the "Order") which is accepted in writing by the Company.
The contract between the Company and the Customer for the sale and
purchase of Parts (the "Contract") shall exclusively comprise the
Company's written quotation for the Parts (if applicable), the Company's
written acceptance of the Order, the Privacy Policy, these standard
terms and conditions (the "Conditions") and any supplementary sale terms
provided by the Company to the Customer and expressly designated as such
by the Company ("Supplementary Sales Terms").
BASIS OF CONTRACT
The Conditions apply to the Contract to the exclusion of any
other terms that the Customer seeks to impose or incorporate, or which
are implied by trade, custom, practice or course of dealing.
Each order for parts constitutes an offer by the Customer to
purchase the Parts in accordance with these Conditions. The Customer
shall ensure that the terms of the Order are complete and accurate
(including without limitation in respect of payment details). The Order
shall record whether the Parts are to be provided by the Company Ex
Works ("EXW") or Delivery at Place ("DAP") (INCOTERMS 2010). The Order
shall only be deemed to be accepted when the Company issues a written
acceptance of the Order, at which point the Contract shall come into
existence. The Contract constitutes the entire agreement between the
parties. The Customer acknowledges that it has not relied on any
statement, promise or representation made or given by or on behalf of
the Company which is not set out in the Contract. Any samples, drawings,
descriptive matter, or advertising issued by the Company and any
descriptions or illustrations contained in the Company's catalogues or
brochures or on any Company website
(including the Website) are issued or published for the sole purpose
of giving an approximate idea of the Parts described in them. They shall
not form part of the Contract or any other contract between the Supplier
and the Customer for the sale of the Parts.
The Company reserves the right to supply the Parts under a
Contract subject to stock availability. The Company shall not be liable
for non-supply of Parts to the Customer in the event that they are not
available. The Company will inform the Customer of the non-availability
of any Parts ordered under a Contract within a reasonable time. The
Company may elect not to supply Parts to the Customer where the Company
reasonably believes that the supply of such Parts may breach export
regulations including without limitation the provisions of the United
States International Traffic in Arms Regulations ("ITAR"). The Customer
agrees and accepts that (i) where low value / high volume Parts are
Ordered (for example, an Order for standard hardware), the Company
reserves the right to use scales and/or other measuring devices to count
and measure the quantity of Parts required to satisfy that Order ("Bulk
Order Measurement"); (ii) where the Company undertakes Bulk Order
Measurement, a tolerance of plus or minus 2 percent difference between
the quantity of Parts Ordered and invoiced and the quantity actually
supplied will be acceptable; and (iii) if the Customer can demonstrate
that the quantity of Parts supplied is less than that ordered or
invoiced, the Company shall, at its sole discretion, provide a pro-rata
refund of any amounts paid for such Parts by the Customer or supply the
short-fall in Parts to the Customer.
The Customer shall ensure that each Order is accompanied by such
documentation as is required by the Company from time to time.
If the part required to quote on Exchange basis on flat rate
exchange and/or plus cost, the Customer must return the core within
thirty days from the date of delivery, otherwise there will be no refund
of core, the Customer must not contact the shop or the MRO station where
the part(s) located with the third party without the Company permission.
If the part subject for delay to deliver of what written on the invoice,
then it’s not the Company responsibility to pay penalties or charges for
delay.
PRICE AND PAYMENT
The price of the Parts shall, subject to any Supplementary Sales
Terms, be the price set out (i) on the Website or otherwise (ii) in the
Company's written quotation for the Parts.
Subject to the remainder, the price of the Parts is exclusive of
amounts of any taxes, duties, levies, import or export charges or
similar charges (including but not limited to any sales tax, goods tax,
services tax, value added tax or other tax or tax penalty on sales
or
consumption of goods or services Sales Tax if applicable) payable in
connection with the sale, collection, or use after collection of the
Parts or otherwise with the Contract, all of which the Customer shall
bear and, upon demand pay to the Company. Where the Parts are to be
provided by the Company DAP, the Company shall bear the costs of meeting
the customs formalities necessary for export of the Parts and all
duties, taxes and other charges payable upon export of the Parts.
The price of the Parts and any Sales Tax (if applicable) shall
become due and payable by the Customer when the Company issues a written
acceptance of the Order, and unless otherwise agreed in writing the
Company shall take payment from the Customer prior to collection of the
Parts.
The Customer shall pay all amounts due under the Contract in full
without any deduction or with holding except as required by law and the
Customer shall not be entitled to assert any credit, set-off or
counterclaim against the Company in order to justify withholding payment
of any such amount in whole or in part. If the Customer fails to make
any payment due under the Contract by the due date for payment ("Due
Date"), then, without limiting the Company’s other remedies, the
Customer shall pay interest on the overdue amount at the rate of 5% per
annum and any reasonable costs incurred by the Company as a direct
result of recovering and collecting the overdue amount ("Overdue Payment
Costs"). Interest shall accrue on a daily basis after the Due Date until
the date of actual payment of the overdue amount, whether before or
after judgment. The Customer shall pay the Overdue Payment Costs
together with the overdue amount.
The Company may at any time, without limiting any other rights or
remedies it may have, set off any amount owing to it by the Customer
against any amount payable by the Company to the Customer.
WARRANTIES, REFUNDS AND REPLACEMENTS
If the Customer gives notice in writing to the Company, within
fourteen days of collection of the Parts (where the Parts are provided
by the Company EXW) or delivery of the Parts (where the Parts are
provided to the Company DAP) (or such time as expressly specified in the
Supplementary Sales Terms) (the "Inspection Period"), that some or all
of the Parts are defective or that some or all of the Parts are not the
Parts ordered ("Non-Conforming Parts"), the Company shall, at its
option, repair or replace the Parts which are the subject of the
Customer's notice or refund the price of those Parts in full. Where the
Company elects to repair, replace or refund the Parts, the Customer
shall, at the Company's sole discretion: (i) at the Customer's expense
return the Parts (together with the original Trace (as defined below))
to: (a) where the
Parts are provided by the Company EXW, the location set out in the
Company's written confirmation of collection (the "Collection
Location"), or (b) where the Parts are provided by the Company DAP, the
delivery location set out the Order (the "Delivery Location") in the
condition in which they were delivered to the Customer and appropriately
packaged for transport in the same manner as when they were delivered to
the Customer; or (ii) at the Customer's expense destroy the
Non-Conforming Parts and provide such proof of their destruction as the
Company shall specify. If the Customer cancels an Order or stock
reservation (in whole or in part) or returns Parts to the Company (in
which case the Company must first consent in writing to such
cancellation or return), the Company shall be entitled to charge the
Customer a restocking fee equal to 10% of the value of Order / stock
reservation (or part-Order / stock reservation) cancelled or the Parts
returned.
Where the Customer has notified the Company before the expiry of
the Inspection Period that the Parts are Non-Conforming Parts, the
Company may inspect the Parts at the Customer's premises to determine
whether the Parts are Non-Conforming Parts. If the Customer fails to
provide the Company with appropriate inspection facilities in a
reasonable time the Parts shall be deemed to be accepted by the Customer
and the Company shall have no obligation to the Customer.
All warranties, representations, conditions and other terms
implied by statute or common law are, to the fullest extent permitted by
law, excluded from the Contract.
These Conditions shall apply to any repaired or replacement Parts
supplied by the Company.
COLLECTION OF GOODS
Any dates or times quoted for collection, delivery, availability
or order priority (including on the Website) are approximate only, and
the Company's obligation to meet such timeframes is one of reasonable
endeavors only. The time of collection, delivery, availability or order
priority is not of the essence.
Where the Parts are provided by the Company EXW, the Company
shall notify the Customer in writing that the Parts are ready for
collection from the Collection Location ("Collection
Notification").
The Customer shall collect the Parts from the Collection Location within
5 working days of the date set out in the Collection Notification.
Without limitation to the foregoing, the Customer shall reimburse the
Company for any costs incurred by the Company related to the transport
or delivery of the Parts from the Collection Location.
Where the Parts are provided by the Company DAP, the Company
shall deliver the Parts, cleared for export, to the Delivery Location on
board the transport conveyance available for unloading by the Customer.
The Company shall notify the Customer in writing that the Parts have
been delivered to the Delivery Location ("Delivery Notification"). The
Customer shall be responsible for unloading the Parts once delivered.
The Company will provide to the Customer all export documentation
necessary for the Customer to arrange customs clearance of the Parts at
the Delivery Location.
Where the Parts are to be provided by the Company EXW for
collection in Miami, proof of export does not need to be provided by the
Customer to the Company but the Customer acknowledges and agrees that
the Company shall, except as expressly set out in these Conditions, have
no on-going obligations to the Customer in respect of the Parts and any
subsequent export and/or import thereof.
DESCRIPTIONS AND SPECIFICATION
The Company's quality system delivered to the Customer under the
process of certified to ISO9001:2015 in accordance with standards and
the packaging of the Parts supplied to the Customer.
All Parts will be sold with trace history certification for a
particular item or batch of Parts ("Trace") unique to the relevant item
or batch, and in collecting the Parts in accordance with the Contract,
(unless the Customer notifies the Company otherwise within the
Inspection Period) the Customer shall be deemed to have accepted that
each item of Parts is collected complete with the corresponding Trace
and the Customer shall not after the Inspection Period raise any claims
against the Company that the Trace is incorrect.
RETENTION OF TITLE
The risk in the Parts shall pass to the Customer at the date that
the Collection Notification is sent by the Company to the Customer.
(Where the Parts are supplied to the Customer EXW) or at the date that
the Delivery Notification is sent by the Company to the Customer (where
the Parts are supplied to the Customer DAP).
Title to the Parts shall not pass to the Customer until the
Company has received payment in full (in cash or cleared funds) for: (i)
the Parts; and (ii) all other sums which are or which become due to the
Company.
CUSTOMER OBLIGATIONS
The Customer grants the Company and its agents and employees an
irrevocable license at any time to enter any premises where the Parts
are or may be stored in order to inspect them, or, where the Customer's
right to possession has terminated (for example due to non-payment), to
recover them.
The Customer warrants and undertakes with the Company (including
without limitation the respective members, employees, agents and
advisors) that it shall comply with all applicable statutes, by laws,
regulations, guidelines, import/export controls and requirements of any
government or other competent authority including, for the avoidance of
doubt, ITAR, airworthiness and all health and safety legislation
relating to the Parts.
The Customer warrants and undertakes with the Company that from
the time of collection of the Parts at the latest, the Customer shall,
at its own expense, maintain in effect policies of insurance in respect
of the Parts against all risks and liabilities (including but not
limited to product liability and consequential loss of
profits).
The Customer accepts and agrees that it shall be its
responsibility (at its expense) to apply for and obtain all necessary or
appropriate licenses, protection orders, legally required consents,
permits and rights to use or have the benefit of the Parts, and
undertakes to indemnify and keep indemnified each of the Indemnified
Persons against any claim by reason of the infringement of any third
party's rights in the course of the sale and purchase set out in the
Contract, or in the course of use of the Parts by the Customer in breach
of any duty or requirement of whatever kind or howsoever, and whenever
arising.
The Customer shall indemnify and hold harmless the Company
(including without limitation, the Company's respective members,
employees, agents and advisors) (the Company together with its
respective members, employees, agents and advisors, the "Indemnified
Persons") against all demands, claims and liability, whether criminal or
civil, in contract, tort or otherwise, for losses, damages, legal costs
and other expenses of any nature whatsoever, asserted by any third party
against or suffered by any of the Indemnified Persons and relating to
manufacture, distribution, sale, supply or use of any of the Parts, by
or on behalf of the Customer or by any third party, including without
limitation, (1) claims based on product liability laws, (2) claims
arising out of or in connection with any death or personal injury
suffered by any person, and/or (3) claims relating to the accuracy of
any "country of origin" information provided by the Company.
EXCLUSION OF LIABILITY
Nothing in these Conditions or any Contract incorporating them
shall limit or exclude a party's liability for: (i) death or personal
injury caused by its negligence, or the negligence of its employees,
agents or subcontractors (as applicable); (ii) fraud or fraudulent
misrepresentation; (iii) breach of the terms implied by section 12 of
the Sale of Goods Act 1979; or (iv) any matter in respect of which it
would be unlawful for either party or the Administrator to exclude or
restrict liability.
Company shall not be liable to the Customer, whether in contract,
tort (including negligence), breach of statutory duty, breach of export
rules including but not limited to ITAR or otherwise, for any loss of
profit or indirect or consequential loss arising under or in connection
with the Contract and the Company's total liability to the Customer in
respect of all other losses arising under or in connection with the
Contract, whether in contract, tort (including negligence), breach of
statutory duty, or otherwise, shall not exceed 100% of the price of the
Parts.
Save in respect of any refunds of these Conditions, to the extent
that the Customer or any third party has any rights or claims arising
out of or in connection with these Conditions or the terms of any
Contract, they shall not amount to expenses of the administration or
disbursements (or any other claim against the estate) whether under
paragraph 99 of Schedule B1 of the Insolvency Act 1986, Rule 2.67 (1) of
the Insolvency Rules 1986 or otherwise and the Customer expressly agrees
to waive such rights.
FORCE MAJEURE
Neither party shall be liable for any failure or delay in
performing its obligations under the Contract to the extent that such
failure or delay is caused by any event beyond a party's reasonable
control, which by its nature could not have been foreseen, or, if it
could have been foreseen, was unavoidable.
GENERAL
Privacy Policy
The Company processes information about the Customer in accordance
with the Company's Privacy Policy, a copy of which is set out on the
Website ("Privacy Policy").
Assignment and Subcontracting
The Company may at any time assign, transfer, charge, subcontract or
deal in any other manner with all or any of its rights or obligations
under the Contract. The Customer may not assign, transfer, charge,
subcontract or deal in any other manner with all or any of its rights or
obligations under the Contract without the prior written consent of the
Company.
Notices
Any notice or other communication given to a party under or in
connection with the Contract shall be in writing, addressed to that
party and shall be delivered personally, sent by pre-paid first-class
post, recorded delivery, commercial courier, fax or e-mail.
A notice or other communication shall be deemed to have been
received: if delivered personally, when left at the registered office,
if sent by pre-paid first-class post or recorded delivery, at 9.00 am on
the second working day after posting; if delivered by commercial
courier, on the date and at the time that the courier's delivery receipt
is signed; or, if sent by fax or e-mail, one working day after
transmission. The provisions of this clause shall not apply to the
service of any proceedings or other documents in any legal action.
Severance
If any court or competent authority finds that any provision of the
Contract (or part of any provision) is invalid, illegal or
unenforceable, that provision or part-provision shall, to the extent
required, be deemed to be deleted, and the validity and enforceability
of the other provisions of the Contract shall not be affected.
If any invalid, unenforceable or illegal provision of the Contract
would be valid, enforceable and legal if some part of it were deleted,
the provision shall apply with the minimum modification necessary to
make it legal, valid and enforceable.
Waiver
A waiver of any right or remedy under the Contract is only effective
if given in writing and shall not be deemed a waiver of any subsequent
breach or default. No failure or delay by a party to exercise any right
or remedy provided under the Contract or by law shall constitute a
waiver of that or any other right or remedy, nor shall it preclude or
restrict the further exercise of that or any other right or remedy. No
single or partial exercise of such right or remedy shall preclude or
restrict the further exercise of that or any other right or remedy.
Third Party Rights
A person who is not a party to the Contract shall not have any rights
under or in connection with it, save as provided in Clause 35 of these
Conditions. Any variation to the Contract, including the introduction of
any additional terms and conditions, shall only be binding when agreed
in writing and signed by both the Company and the Customer.
Governing Law and Place of Sale
The of the Parts to a Customer under the Contract shall only be
deemed to take place from all our FOB points. These Conditions and any
Contract in which they are incorporated, shall be governed by and
construed in accordance with applicable to the law of the United
Kingdom. The appropriate English court shall have exclusive jurisdiction
arising out of the Contract or this website. If any of these terms are
held invalid or unenforceable, that part will be deemed modified as
necessary to make it effective, and the remaining provision of these
terms will remain in effect.
Thank you for your business!
Last updated: October 2026
1. Who we are
Aviator Solutions Limited (“Aviator”, “we”, “us”) is a company registered in England and Wales (No. 6856477, VAT 208 5023 38). We are the data controller for the personal information collected through www.aviatorsolutions.com and in the course of our business. Contact: sales@aviatorsolutions.com.
2. What we collect
Contact details you give us: name, company, job title, email, phone, delivery address and country.
Request details: part numbers, quantities, condition, serial numbers, fault descriptions and documents you send for quotes, orders and repairs.
Commercial and compliance records: quotations, purchase orders, invoices, end-user / end-use certificates and shipping documents.
Basic technical data needed to run the website securely (for example IP address and browser type in server logs).
3. Why we use it and our legal basis
To answer requests, prepare quotes and fulfil orders – to take steps at your request before entering a contract, and to perform the contract.
Export control and sanctions screening – to comply with our legal obligations under UK and US export control and sanctions laws.
Accounting, tax and record keeping – legal obligation.
Customer service and occasional business updates – our legitimate interests in running and developing our business. You can opt out of updates at any time.
4. Who we share it with
Suppliers and repair stations (MROs): when we source a part or a repair we send the part number, quantity, condition and (for repairs) serial number and fault only. We do not pass your name or company details to them.
Freight forwarders, couriers and customs agents, to deliver your order.
Banks and payment providers, to process payments.
Our IT and hosting providers (for example IONOS), who store data on our behalf under contract.
Professional advisers and authorities where required by law, including export control authorities.
We do not sell your personal data.
5. International transfers
We operate from the United Kingdom and work with partners worldwide, including in the United States. Where personal data is transferred outside the UK we use appropriate safeguards, such as UK adequacy regulations or the UK International Data Transfer Agreement / Addendum.
6. How long we keep it
We keep quotation, order, invoice and compliance records for at least six years after the end of the financial year they relate to, as required for UK tax and export records. Enquiries that do not lead to an order are deleted or anonymised after three years.
7. Your rights
Under UK data protection law you can ask to access, correct or delete your data, restrict or object to its use, and receive a copy of it. Email sales@aviatorsolutions.com. You can also complain to the Information Commissioner’s Office (ico.org.uk).
8. Cookies
The website only uses cookies and local storage that are strictly necessary for it to work (for example remembering your request list). We do not use advertising or tracking cookies.
9. Security
We use appropriate technical and organisational measures to protect your data, including encrypted connections (HTTPS) and restricted access to our team portal.
10. Changes
We may update this policy from time to time. The latest version is always on this page.
Aviator Solutions Limited verifies the end use and end user of every sale and lease to comply with UK and US export control and sanctions laws, including the EAR and ITAR. Parts may be subject to export licences.
Before we can ship, customers may be asked to sign our Blanket End Use / End User Certification. We may decline any order where we reasonably believe the supply could breach export regulations.
Subject: Compliance with United Kingdom and United States
Export Regulations
It is the policy of Aviator Solutions Limited to verify the end use
and end user in the sale and/or lease of all products by Aviator
Solutions Limited to ensure compliance with applicable export control
laws and regulations. Because the products you are purchasing and/or
leasing may be exported and used outside of the United States, please
confirm the following:
I (We) will not export or re-export any products purchased and/or
leased from Aviator Solutions Limited to Cuba, Iran, Russia, Libya,
North Korea, Sudan, Syria, Belize, Zimbabwe and all those suspicious
named companies listed under the US federal register/ Vol. 78, No. 239
that effective date of action taken on December 2013 onwards.
I (We) understand that Goods provided by Aviator Solutions Limited
(“Seller’s Goods”) are subject to U.S. export control laws and
regulations, including, without limitation, the International Traffic in
Arms Regulation (ITAR) (22 C.F.R. 120 et seq.) or the Export
Administration Regulations, 15 C.F.R. 730-774.
I (We) will not sell, transfer, export or re-export any products
and/or leased from Aviator Solutions Limited for use in activities which
involve the development, production, use or stockpiling of nuclear,
chemical or biological weapons or missiles, nor use products purchased
and/or leased from Aviator Solutions Limited in any facilities which are
engaged in activities related to such weapons.
I (We) will not integrate/incorporate Seller’s Goods into a military
item in the People’s Republic of China, Russia or Venezuela.
I (We) will not use Seller’s Goods in a military application or by a
military end-user, as well as the national guard and national police,
government intelligence or reconnaissance organizations, or any person
or entity whose actions or functions are intended to support ‘military
end uses’, in the People’s Republic of China, Russia or Venezuela.
I (We) will not use Seller’s Goods in the development or production
of a military item in the People’s Republic of China, Russia or
Venezuela.
I (We) acknowledge that U.S. law prohibits the sale, transfer,
export, re-export to, or participate in any export transaction involving
Seller’s Goods with individuals or companies listed in the U.S.
Department of Commerce’s Denied Persons List, Entity List, or Unverified
List; the U.S. Department of Treasury’s Specially Designated Nationals
and Blocked Persons Lists; or the U.S. Department of State’s Debarred
Persons List.
I (We) acknowledge that UK and USA law prohibits the sale,
transfer, export or re-export or other participation in any export
transaction involving products purchased and/or leased from Aviator
Solutions Limited with individuals or companies listed in the UK
Commerce Department’s Denied Person List, the UK Treasury Department’s
list of Specially Designated and the US Department of Commerce.
I (We) will abide by all applicable UK and US export control laws
and regulations for any products purchased and/or leased from Aviator
Solutions Limited and will obtain any licenses or prior approvals
required by the UK and the USA Government prior to export or re-export
of products purchased and/or leased from Aviator Solutions
Limited.
I (We) agree to be bound by the export control requirements in
above and further agree that such requirements shall survive the
completion, early termination, cancellation or expiration of the
applicable purchase order, agreement or contract.
I (We) confirm that our authorized freight forwarder will be
responsible for filing any applicable export documents and will provide
any required information to Aviator Solutions limited. This shall apply
to any transaction between us and Aviator Solutions Limited unless
specifically revoked.
Certification:
I certify that I am a responsible principal of my Company authorized
to legally obligate my Company and that I am authorized to sign this
Export End Use Certification. I also certify to the best of my knowledge
that all of the information contained in this document is true and
correct, and I do not know of any additional facts which are
inconsistent with such information.
THIS AUTHORIZATION DOES NOT INCLUDE MOVEMENT OF THE EQUIPMENT
INTO
Cuba, Iran, Libya, North Korea, Sudan, Syria, Belize,
Zimbabwe, Russia
and all those suspicious named companies listed under the US
federal register/ Vol. 78, No. 239
that effective date of action taken on December 2013
onwards
